N.M.ELECTRONICS

            The objective of this project is to provide easy access in the reservation center of hospital by using embedded smart card systems.

            This project is very useful to the peoples and reservation center in hospital because it provides the easy access in the reservation system. In this project, embedded smart card is used as reservation ticket. Therefore, this project improves the security performance because we cannot make the duplicate embedded smart card. 

            This project is designed by following blocks

Ø  Embedded smart card system

Ø  LCD display

Ø  Micro controller

Ø  Keypad

Ø  EEPROM

The Embedded smart card is the special type wireless card which has inbuilt the embedded chip along with loop antenna. The inbuilt embedded chip represents the some digit card number. 

              In this project Embedded smart card is used for reservation purpose in hospital. So the person who wants to reserve their roll number he has to show the card to reader. Embedded smart card reader is interfaced with microcontroller. Here the microcontroller is the flash type reprogrammable microcontroller in which we already programmed with card number. The hospital provides the embedded card to the new patients.

  For an example when the patient shows the smart cart to the reader, then the patient roll number is automatically stored.  If the Embedded smart card is not valid, the micro controller will display the “Authentication Fail “on the LCD display

1.      Low power consumption

2.      It provides the easy access in the reservation center in hospital

3.       It improves security performance because we cannot make the duplicate embedded smart card.

                 This project is very useful to the hospital and medical center